Top categories
Quick Links

Place here any module, widget, design or HTML. for example menu, categories

HP i3
0/50 reviews
Write a review

MANUAL SPRAY SYSTEMS IB348 BENCH B3+S4+TANK

  • Product Code: PRE1000684

The machine is composed by:-Vacuum bench created to be placed on the working plane and equipped with a silent and powerful engine to contain even more the nebulized adhesive. -Spray gun G6 with ergonomic handle which makes it an efficacious and precise alternative to the brush. The spray gun can perform a jet of glue from a minimum of 3 mm up to a maximum of 50 mm. -Stainless steel tank 10 lt. capacity treated with non-stick Teflon. The vacuum module can be used in different ways: putting it on an existing table and making an hole on the plane, simply by putting it on a working table in order to have the intake on the plane or by placing it vertically to have the intake in front of you. These characteristics make it suitable to all working realities. The spray gun has been created to extend the advantages of using water based adhesives also during the assembling phases where solvent based adhesive are still widely used. The operator, after starting the machine, can place the materials on the working plane so to make maximum use of the intake on the working plane for both keeping the materials standing and absorbing the nebulized adhesive. All the spray gun functions can be adjusted: quantity of adhesive, width of jet and quality of distribution even on different thicknesses. For a proper functioning of the vacuum bench it is recommended to replace the filter each time is visibly dirty or when the vacuum bench is not intaking properly. A jet of air immediately before and after the adhesive nebulization keeps the nozzle constantly clean. Our systems are maintenance free. The tank is conceived in a way that allow the use of the adhesive in bag in box avoiding to make dirty the tank and to filter the glue thus preventing the contact with air which can alter its properties


MANUAL SPRAY SYSTEMS I348 BENCH B3+S4+TANK

ELECTRICAL SPECIFICATIONS
Decibel (dB) 63.3
electricity Hertz 50
VOLTAGE 230
Volume M3 0.235
Physical Specifications
Capacity M3 / Hr 800
HEIGHT (CM) 64 CM
LENGTH (CM) 67 CM
WIDTH (CM) 55 CM
Net Weight(kg) 30.430 KG
  • Brand: SEPA
  • Viewed: 3806

DISLIKE

Easy Adaptation
Better ROI
On-Time Support
ELECTRICAL SPECIFICATIONS
Decibel (dB) 63.3
electricity Hertz 50
VOLTAGE 230
Volume M3 0.235
Physical Specifications
Capacity M3 / Hr 800
HEIGHT (CM) 64 CM
LENGTH (CM) 67 CM
WIDTH (CM) 55 CM
Net Weight(kg) 30.430 KG
The machine is composed by:-Vacuum bench created to be placed on the working plane and equipped with a silent and powerful engine to contain even more the nebulized adhesive. -Spray gun G6 with ergonomic handle which makes it an efficacious and precise alternative to the brush. The spray gun can perform a jet of glue from a minimum of 3 mm up to a maximum of 50 mm. -Stainless steel tank 10 lt. capacity treated with non-stick Teflon. The vacuum module can be used in different ways: putting it on an existing table and making an hole on the plane, simply by putting it on a working table in order to have the intake on the plane or by placing it vertically to have the intake in front of you. These characteristics make it suitable to all working realities. The spray gun has been created to extend the advantages of using water based adhesives also during the assembling phases where solvent based adhesive are still widely used. The operator, after starting the machine, can place the materials on the working plane so to make maximum use of the intake on the working plane for both keeping the materials standing and absorbing the nebulized adhesive. All the spray gun functions can be adjusted: quantity of adhesive, width of jet and quality of distribution even on different thicknesses. For a proper functioning of the vacuum bench it is recommended to replace the filter each time is visibly dirty or when the vacuum bench is not intaking properly. A jet of air immediately before and after the adhesive nebulization keeps the nozzle constantly clean. Our systems are maintenance free. The tank is conceived in a way that allow the use of the adhesive in bag in box avoiding to make dirty the tank and to filter the glue thus preventing the contact with air which can alter its properties


MANUAL SPRAY SYSTEMS I348 BENCH B3+S4+TANK

menu