Glueing
MANUAL SPRAY SYSTEMS IB348 BENCH B3+S4+TANK
- Product Code: PRE1000684
Description
The machine is composed by:-Vacuum bench
created to be placed on the working plane and
equipped with a silent and powerful engine to
contain even more the nebulized adhesive.
-Spray gun G6 with ergonomic handle which
makes it an efficacious and precise alternative
to the brush. The spray gun can perform a jet of
glue from a minimum of 3 mm up to a maximum
of 50 mm. -Stainless steel tank 10 lt. capacity
treated with non-stick Teflon.
The vacuum module can be used in different
ways: putting it on an existing table and making
an hole on the plane, simply by putting it on a
working table in order to have the intake on the
plane or by placing it vertically to have the intake
in front of you. These characteristics make it
suitable to all working realities. The spray gun
has been created to extend the advantages of
using water based adhesives also during the
assembling phases where solvent based
adhesive are still widely used.
The operator, after starting the machine, can place the materials on the working plane so to
make maximum use of the intake on the working plane for both keeping the materials
standing and absorbing the nebulized adhesive. All the spray gun functions can be adjusted:
quantity of adhesive, width of jet and quality of distribution even on different thicknesses. For a
proper functioning of the vacuum bench it is recommended to replace the filter each time is
visibly dirty or when the vacuum bench is not intaking properly. A jet of air immediately before
and after the adhesive nebulization keeps the nozzle constantly clean. Our systems are
maintenance free. The tank is conceived in a way that allow the use of the adhesive in bag in
box avoiding to make dirty the tank and to filter the glue thus preventing the contact with air
which can alter its properties
MANUAL SPRAY SYSTEMS I348 BENCH B3+S4+TANK |
Specification
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| Decibel (dB) | 63.3 |
| electricity Hertz | 50 |
| VOLTAGE | 230 |
| Volume M3 | 0.235 |
| Physical Specifications | |
| Capacity M3 / Hr | 800 |
| HEIGHT (CM) | 64 CM |
| LENGTH (CM) | 67 CM |
| WIDTH (CM) | 55 CM |
| Net Weight(kg) | 30.430 KG |
- Brand: SEPA
Specification
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| Decibel (dB) | 63.3 |
| electricity Hertz | 50 |
| VOLTAGE | 230 |
| Volume M3 | 0.235 |
| Physical Specifications | |
| Capacity M3 / Hr | 800 |
| HEIGHT (CM) | 64 CM |
| LENGTH (CM) | 67 CM |
| WIDTH (CM) | 55 CM |
| Net Weight(kg) | 30.430 KG |
Description & Video
The machine is composed by:-Vacuum bench
created to be placed on the working plane and
equipped with a silent and powerful engine to
contain even more the nebulized adhesive.
-Spray gun G6 with ergonomic handle which
makes it an efficacious and precise alternative
to the brush. The spray gun can perform a jet of
glue from a minimum of 3 mm up to a maximum
of 50 mm. -Stainless steel tank 10 lt. capacity
treated with non-stick Teflon.
The vacuum module can be used in different
ways: putting it on an existing table and making
an hole on the plane, simply by putting it on a
working table in order to have the intake on the
plane or by placing it vertically to have the intake
in front of you. These characteristics make it
suitable to all working realities. The spray gun
has been created to extend the advantages of
using water based adhesives also during the
assembling phases where solvent based
adhesive are still widely used.
The operator, after starting the machine, can place the materials on the working plane so to
make maximum use of the intake on the working plane for both keeping the materials
standing and absorbing the nebulized adhesive. All the spray gun functions can be adjusted:
quantity of adhesive, width of jet and quality of distribution even on different thicknesses. For a
proper functioning of the vacuum bench it is recommended to replace the filter each time is
visibly dirty or when the vacuum bench is not intaking properly. A jet of air immediately before
and after the adhesive nebulization keeps the nozzle constantly clean. Our systems are
maintenance free. The tank is conceived in a way that allow the use of the adhesive in bag in
box avoiding to make dirty the tank and to filter the glue thus preventing the contact with air
which can alter its properties
MANUAL SPRAY SYSTEMS I348 BENCH B3+S4+TANK |
More machines
-285x318.jpeg "SEPA HOTMELT APPLICATOR FOR 3MM 5MM 8MM")
